AMX5000/AMX5010 Switches
		         Firmware Revision 3.2.0.14  
                            Release Notes
                            October 14, 2004
 
This document outlines: 

1. AMX5000 and AMX5010 Switch Firmware Version
2. AMX5000 and AMX5010 Switch Compatibility
3. Important Installation Notes
4. How to upgrade
5. Enhancements/Fixes/Known Issues

===============================================================================
                 AMX5000 and AMX5010 Switch Firmware Version
===============================================================================
Firmware Information:
AMX5000 and AMX5010 Switch  3.2.0.14 

This revision of AMX5000 and AMX5010 switches is intended to be released and 
used with the following AMX™ switching system revisions: 

 - AMWorks® software revision 5.0.0.39
 - AMX51xx revision 3.0.0.42
 - AMIQ (all types) revision 4.0.6.0

===============================================================================
                AMX5000 and AMX5010 Switch Compatibility
===============================================================================

 - Revision 3.2.0.14 of AMX5000 and AMX5010 is fully compatible with the following: 
	AMWorks® software			From revision 5.0.0.5 
	AMX5100	 user station			From revision 1.1.3.42
	AMX5110 user station			From revision 1.2.2.22
	AMX5120	 user station			From revision 1.2.2.22
	AMIQ-PS2 server interface module	From revision 2.0.0.2
	AMIQ-VSN server interface module	From revision 3.0.0.1
	AMIQ-WSN server interface module	From revision 3.0.0.1
	AMIQ-USB server interface module	From revision 3.0.0.1

- Revision 3.2.0.14 of AMX5000 and AMX5010 introduces new features that will 
  only operate with the following AMX switch firmware revisions: 
	AMWorks software 			From revision 5.0.0.39 
	AMX5100	 user station			From revision 3.0.0.42   
	AMX5110 user station			From revision 3.0.0.42
	AMX5120	 user station			From revision 3.0.0.42   
	AMIQ-PS2 server interface module	From revision 4.0.6.0 
	AMIQ-VSN server interface module	From revision 4.0.6.0
	AMIQ-WSN server interface module	From revision 4.0.6.0 
	AMIQ-USB server interface module	From revision 4.0.6.0


===============================================================================
                                           How to upgrade
===============================================================================
You may update the firmware from AMWorks software version 5.0.0.39 or from your 
current revision of AMWorks® software.

We recommend that you first update AMWorks software to 5.0.0.39.

How do I update the firmware on my AMX5000 and AMX5010 Switches?
==================================================
1. Install AMWorks software as described in the release notes entitled
    "AMWorks_Release_Notes.txt".

2. From your newly installed AMWorks software, Select 'Admin Tools - 
    Firmware Update' from the menu.

3. Select all of the AMX50xx switches on your configuration.

4. From the "firmware update" dialog, select the update file for the AMX50xx 
    switches. This file will be named "amx50xx.avt". 
    Ensure you select the revision 3.2.0.14. 

5. Select "begin update", and all firmware updates will complete. 
    You may update all of your AMX50xx switches  in parallel, for fastest results. 
    It will take about 5 minutes for the firmware updates to complete.


===============================================================================
                                 Enhancements 
===============================================================================
This release of AMX5000 and AMX5010 switches firmware/software contains the following 
enhancements: 

1. Support for new user settings - target flag and server hotkeys.
2. Support for seamless connection to target servers attached through cascaded 
    KVM switches: 
    List of supported KVM switches
    
    AutoView® Commander Switches
    AutoView 200 Switches
    AutoView 400 Switches
    AutoView 416 Switches
    AutoView 424 Switches
    AutoView 1000R Switches
    AutoView 2000R Switches
    AutoView 2000 Switches
    IBM C2T
    DSR® Switches 
    generic KVM Switches
    OutLook® ES Switches
    SwitchView® OSD Switch
    XP® Switch Series (XPDU/XP1104)


3. Support for Force Mode

===============================================================================
                                         Fixes
===============================================================================
This release of firmware/software contains the following fixes for the AMX5000 
and AMX5010 switches:

1. Intermittent : "Insufficient Paths" reported, even when paths were physically available.
2. Intermittent : Adding/removing AMIQ modules occasionally not automatically 
   reported to OSD. 

===============================================================================
                                         Known Issues
===============================================================================
This release of firmware/software contains the following known issues for the AMX5000 
and AMX5010 switches:

1. Not Applicable