AMIQ-PS2 Server Interface Module Firmware Version 4.0.6.0 Release Notes October 14, 2004 This document outlines: 1. AMIQ-PS2 Server Interface Module Firmware Version 2. AMIQ-PS2 Server Interface Module Firmware Compatibility 3. How to upgrade 4. Enhancements/Fixes/Known Issues =============================================================================== AMIQ-PS2 Server Interface Module Firmware Version =============================================================================== Version Information: Application Code 4.0.6.0 Boot Code 4.0.6.0 FPGA 2.0.8.0 This version of AMIQ-PS2 firmware uses amiqps2.avt files for upgrade. =============================================================================== AMIQ-PS2 Server Interface Module Firmware Compatibility =============================================================================== This revision is compatible with the following firmware: AMX5000 and AMX5010 switch: - Basic functionality with all revisions. - Full feature support requires 3.2.0.14 or higher. AMX5100 user station: - Basic functionality with all revisions. - Full Japanese and Korean layout support with version 1.1.6.3 or higher only. - No Extended Keyboard Support. - Full feature support requires 3.0.0.42 or higher. AMX5110 user station: - Basic functionality with all revisions. - No Extended Keyboard Support. - Full feature support requires 3.0.0.42 or higher. AMX5120 user station: - Basic functionality with all revisions. - Extended Keyboard Support with revision 1.3.0.0 or higher only. - Full feature support requires 3.0.0.42 or higher. AMWorks software: - Version 5.0.0.39 or higher AMIQ-PS2 Server Interface Module: - Version 2.0.0.2 (app) 2.0.0.0 (boot) and higher. AutoView® 1000R/2000R: - Version 2.0.21 This AMIQ-PS2 release is compatible with the following hardware: AMIQ-PS2: - All hardware revisions of AMIQ-PS2. =============================================================================== How to Upgrade =============================================================================== To upgrade the flash in the AMIQ you will need to copy the file AMIQPS2.avt to a machine running AMWorks software rev 3.0.3.6 or higher. Then follow the instructions in AMWorks software for downloading the new software. 1. Download the file "AMIQPS2.avt" to a drive that is accessible by the machine running AMWorks software. 2. Using the AMWorks software, download the file to all the AMIQ moduels that are to be upgraded. This is done by selecting Admin Tools - Firmware Updates, selecting the file "AMIQPS2.avt" and the names of the AMIQ modules to be upgraded, and then click begin upgrade. =============================================================================== Enhancements =============================================================================== This release of AMIQ-PS2 server interface module firmware contains the following enhancements: 1. Support for seamless switching of KVM switches cascaded to an AMIQ-PS2 module List of supported KVM switches AutoView® Commander Switches AutoView 200 Switches AutoView 400 Switches AutoView 416 Switches AutoView 424 Switches AutoView 1000R Switches AutoView 2000R Switches AutoView 2000 Switches IBM C2T DSR® Switches generic KVM Switches OutLook® ES Switches SwitchView® OSD Switch XP® Switch Series (XPDU/XP1104) It is strongly recommended to update the attached KVM switch to the latest available software load, before connecting it to the AMX system. 2. Changed internal communication to be compatible with improved protocol =============================================================================== Fixes =============================================================================== This release of AMIQ-PS2 server interface module firmware contains the following fixes: 1. Not Applicable =============================================================================== Known Issues =============================================================================== This release of AMIQ-PS2 server interface module firmware contains the known issues: 1. Not Applicable