-- Avocent Vendor Cyclades CS Family MIB OID Tree
-- Release 1.0.0 May/15/2007

AVOCENT-MIB DEFINITIONS ::= BEGIN

IMPORTS
   enterprises
      FROM SNMPv2-SMI ;

avocent		OBJECT IDENTIFIER ::= { enterprises 10418 }
cycladesCS	OBJECT IDENTIFIER ::= { avocent 15 }
ccsProducts	OBJECT IDENTIFIER ::= { cycladesCS 1 }

cCS4001	OBJECT IDENTIFIER ::= { ccsProducts 1 }
cCS4004	OBJECT IDENTIFIER ::= { ccsProducts 2 }
cCS4008	OBJECT IDENTIFIER ::= { ccsProducts 3 }
cCS4016	OBJECT IDENTIFIER ::= { ccsProducts 4 }

END

-- Cyclades CS Family MIB management

AVOCENT-CYCLADES-CS-MIB DEFINITIONS ::= BEGIN

IMPORTS
	cycladesCS
		FROM AVOCENT-MIB
	MODULE-IDENTITY
		FROM SNMPv2-SMI;

ccsManagement MODULE-IDENTITY
	LAST-UPDATED	"200704260000Z"
	ORGANIZATION	"Avocent Corporation"
	CONTACT-INFO	"postal: Avocent Corporation
			3541 Gateway Boulevard
			Fremont, CA 94538, USA
			e-mail: Technical Support
			techsupport@avocent.com"
	DESCRIPTION	"This file defines the Avocent MIB extensions to 
		Cyclades CS Family products"
	REVISION	"200704260000Z"
	DESCRIPTION	"First Draft"
::= { cycladesCS 2 }

-- Current Avocent Cyclades CS Family core mib table entries:
--	ccsSystem			OBJECT-IDENTITY  ::= { ccsManagement 1 }
--	ccsConfiguration		OBJECT-IDENTITY  ::= { ccsManagement 2 }
--	ccsInformation		OBJECT-IDENTITY  ::= { ccsManagement 3 }
--	ccsAdministration	OBJECT-IDENTITY  ::= { ccsManagement 4 }
--	ccsPowerManagement	OBJECT-IDENTITY  ::= { ccsManagement 5 }

END

AVOCENT-CYCLADES-CS-SYS-MIB DEFINITIONS ::= BEGIN

IMPORTS
	ccsManagement
		FROM AVOCENT-CYCLADES-CS-MIB
	OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY, Integer32
		FROM SNMPv2-SMI
	DisplayString
		FROM SNMPv2-TC;

ccsSystem MODULE-IDENTITY
	LAST-UPDATED	"200704260000Z"
	ORGANIZATION	"Avocent Corporation"
	CONTACT-INFO	"postal: Avocent Corporation
			3541 Gateway Boulevard
			Fremont, CA 94538, USA
			e-mail: Technical Support
			techsupport@avocent.com"
	DESCRIPTION	"This module defines Cyclades CS Family System Information objects"
	REVISION	"200704260000Z"
	DESCRIPTION	"First Draft"
::= { ccsManagement 1 }

ccsPname OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "The product's name - CCS40xx (xx - the number of the serial ports)"
::= { ccsSystem 1 }

ccsVersion OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "The firmware's version"
::= {ccsSystem 2}

ccsPower OBJECT-IDENTITY
	STATUS current
	DESCRIPTION "It gives information about Power Supply"
::= { ccsSystem 3 }

ccsPwNum OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "Number of the power supplies"
::= { ccsPower 1 }

ccsPw1 OBJECT-TYPE
	SYNTAX INTEGER {
		noinstalled(0),
		powerON(1),
		powerOFF(2)
	}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "State of the first power supply"
::= { ccsPower 2 }

ccsPw2 OBJECT-TYPE
	SYNTAX INTEGER {
		noinstalled(0),
		powerON(1),
		powerOFF(2)
	}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "State of the second power supply"
::= { ccsPower 3 }

ccsPcmcia OBJECT-IDENTITY
	STATUS current
	DESCRIPTION "PCMCIA card information"
::= {ccsSystem 4}

ccsNPcmcia OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "Number of the cards PCMCIA available"
::= { ccsPcmcia 1 }

ccsCardIdentTable OBJECT-TYPE
	SYNTAX SEQUENCE OF CcsCardIdentEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "Card identification"
::= { ccsPcmcia 2 }

ccsCardIdentEntry OBJECT-TYPE
	SYNTAX CcsCardIdentEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "One particular association between PCMCIA socket and card identification"
	INDEX { ccsCardIdentIndex }
::= { ccsCardIdentTable 1 }

CcsCardIdentEntry ::= SEQUENCE {
	ccsCardIdentIndex Integer32,
	ccsCardIdentProd DisplayString,
	ccsCardIdentMan DisplayString ,
	ccsCardIdentFunc DisplayString,
	ccsCardIdentPCI DisplayString
}

ccsCardIdentIndex OBJECT-TYPE
	SYNTAX Integer32(0..2)
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "number to identifier the socket Card"
::= { ccsCardIdentEntry 1 }

ccsCardIdentProd OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "Product identification strings"
::= { ccsCardIdentEntry 2 }

ccsCardIdentMan OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "Manufacturer ID codes"
::= { ccsCardIdentEntry 3 }

ccsCardIdentFunc OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "Function ID code"
::= { ccsCardIdentEntry 4 }

ccsCardIdentPCI OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "PCI ID"
::= { ccsCardIdentEntry 5 }

ccsCardConfTable OBJECT-TYPE
	SYNTAX SEQUENCE OF CcsCardConfEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "This table has the socket configuration "
::= { ccsPcmcia 3 }

ccsCardConfEntry OBJECT-TYPE
	SYNTAX CcsCardConfEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "One particular association between PCMCIA socket and its configuration"
	INDEX { ccsCardConfIndex }
::= { ccsCardConfTable 1 }

CcsCardConfEntry ::= SEQUENCE {
	ccsCardConfIndex Integer32,
	ccsCardConfPower DisplayString,
	ccsCardConfType DisplayString ,
	ccsCardConfInter DisplayString,
	ccsCardConfFunc DisplayString,
	ccsCardConfCardv DisplayString,
	ccsCardConfPort1 DisplayString,
	ccsCardConfPort2 DisplayString
}

ccsCardConfIndex OBJECT-TYPE
	SYNTAX Integer32(0..2)
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "number to identifier the socket PCMCIA"
::= { ccsCardConfEntry 1 }

ccsCardConfPower OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "Power Settings"
::= { ccsCardConfEntry 2 }

ccsCardConfType OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "Interface Type"
::= { ccsCardConfEntry 3 }

ccsCardConfInter OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "Interrupt number"
::= { ccsCardConfEntry 4 }

ccsCardConfFunc OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "function"
::= { ccsCardConfEntry 5 }

ccsCardConfCardv OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "Card values"
::= { ccsCardConfEntry 6 }

ccsCardConfPort1 OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "I/O Port 1"
::= { ccsCardConfEntry 7 }

ccsCardConfPort2 OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "I/O Port 2"
::= { ccsCardConfEntry 8 }

ccsCardStatusTable OBJECT-TYPE
	SYNTAX SEQUENCE OF CcsCardStatusEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "This table has the current socket status flags "
::= { ccsPcmcia 4 }

ccsCardStatusEntry OBJECT-TYPE
	SYNTAX CcsCardStatusEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "One particular association between PCMCIA socket and its status"
	INDEX { ccsCardStatusIndex }
::= { ccsCardStatusTable 1 }

CcsCardStatusEntry ::= SEQUENCE {
	ccsCardStatusIndex Integer32,
	ccsCardStatusCard DisplayString,
	ccsCardStatusFunc DisplayString
}

ccsCardStatusIndex OBJECT-TYPE
	SYNTAX Integer32(0..2)
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "number to identifier the socket PCMCIA"
::= { ccsCardStatusEntry 1 }

ccsCardStatusCard OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "Current Card State"
::= { ccsCardStatusEntry 2 }

ccsCardStatusFunc OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "Current Function"
::= { ccsCardStatusEntry 3 }

ccsFlashSize OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "Total amount of flash memory in Mbytes"
::= {ccsSystem 5}

ccsRAMSize OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "Total amount of RAM in Mbytes"
::= {ccsSystem 6}

ccsCPUfreq OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "CPU clock in MHz"
::= {ccsSystem 7}

ccsDevId OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "The product's identifier"
::= { ccsSystem 8 }

END

AVOCENT-CYCLADES-CS-CONF-MIB DEFINITIONS ::= BEGIN

IMPORTS
	ccsManagement
			FROM AVOCENT-CYCLADES-CS-MIB
	InterfaceIndexOrZero
			FROM IF-MIB
	MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
	IpAddress, Integer32
			FROM SNMPv2-SMI
	DisplayString
			FROM SNMPv2-TC;

ccsConfiguration    MODULE-IDENTITY
	LAST-UPDATED	"200704260000Z"
	ORGANIZATION	"Avocent Corporation"
	CONTACT-INFO	"postal: Avocent Corporation
			3541 Gateway Boulevard
			Fremont, CA 94538, USA
			e-mail: Technical Support
			techsupport@avocent.com"
	DESCRIPTION	"This module defines Cyclades CS Family Configuration objects"
	REVISION	"200704260000Z"
	DESCRIPTION	"First Draft"
::= { ccsManagement 2 }

-- Current Avocent Cyclades CS Family Configuration core mib table entries :
--	ccsHostName			OBJECT-TYPE	::= { ccsConfiguration 1 }
--	ccsConsoleBanner		OBJECT-TYPE	::= { ccsConfiguration 2 }
--	ccsMotd				OBJECT-TYPE	::= { ccsConfiguration 3 }
--	ccsEthItf			OBJECT-IDENTITY	::= { ccsConfiguration 4 }
--	ccsNameService		OBJECT-IDENTITY	::= { ccsConfiguration 5 }  
--	ccsSerialPortConf	OBJECT-IDENTITY	::= { ccsConfiguration 6 }

ccsHostName	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (1..40))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The Host Name "
::= { ccsConfiguration 1 }                              

ccsConsoleBanner	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (1..255))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The console banner "
::= { ccsConfiguration 2 }                              

ccsMotd	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..255))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The motd message "
::= { ccsConfiguration 3 }                              

ccsEthItf	OBJECT-IDENTITY
	STATUS     	current
	DESCRIPTION "The configuration of the Ethernet Interface"   
::= { ccsConfiguration 4 }

ccsEthDhcpc	OBJECT-TYPE
	SYNTAX	INTEGER	{
			inactive(0),	-- DHCP is inactive
			active(1),	-- DHCP is active
			restore(2)	-- DHCP is active and CCS saves the last parameters 
					-- assigned by the server
			}
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The CCS can request all of its ethernet parameters 
				 to a DHCP server"
::= { ccsEthItf 1 }

ccsEthIPaddr	OBJECT-TYPE
	SYNTAX		IpAddress
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"This is the IP address of the Ethernet Interface"
::= { ccsEthItf 2 }

ccsEthIPmask		OBJECT-TYPE
	SYNTAX		IpAddress
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The mask fot the Ethernet network"
::= { ccsEthItf 3 }

ccsEthMTU		OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The Maximum Transmission Unit size, wich determines 
			 whether or not packets should be broken up"
::= { ccsEthItf 4 }

ccsEthIPaddr2	OBJECT-TYPE
	SYNTAX		IpAddress
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The Ethernet secondary IP address"
::= { ccsEthItf 5 }

ccsEthIPmask2	OBJECT-TYPE
	SYNTAX		IpAddress
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The Ethernet secondary IP mask"
::= { ccsEthItf 6 }

ccsNameService	OBJECT-IDENTITY
	STATUS		current
	DESCRIPTION	"The Name Service configuration"
::= { ccsConfiguration 5 }  

ccsResolverOrder	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..15))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"It specifies how host lookups are to be performed.
			 Valid values : empty, 'hosts', 'bind', 'hosts, bind', 
			 'bind, hosts' "
::= { ccsNameService 1 }
                   
ccsMultipleIP	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..3))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Valid values are ON or OFF. If set to ON, the resolve 
			 library will return all valid addresses for a host 
			 that appears in the /etc/hosts file, instead of only 
			 the first.  "
::= { ccsNameService 2 }

ccsDNSserv		OBJECT-IDENTITY
	STATUS		current
	DESCRIPTION	"The DNS server configuration"
::= { ccsNameService 3 }

ccsDNSpriserv	OBJECT-TYPE
	SYNTAX		IpAddress
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Internet Address (in dot notation) of primary name 
			 server that the resolver should query."
::= { ccsDNSserv 1 }
 
ccsDNSsecserv	OBJECT-TYPE
	SYNTAX		IpAddress
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Internet Address (in dot notation) of secondary name 
			 server that the resolver should query."
::= { ccsDNSserv 2 }

ccsDNSdomain		OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (1..40))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Local domain name ."
::= { ccsDNSserv 3 }

ccsSerialPortConf	OBJECT-IDENTITY
	STATUS		current
	DESCRIPTION	"The PortSlave configuration - pslave.conf file. 
			 It configures the all serial ports."
::= { ccsConfiguration 6 }  

ccsSerialGlobal		OBJECT-IDENTITY
	STATUS		current
	DESCRIPTION	"These parameters have the prefix conf. in 
			 the pslave.conf file"
::= { ccsSerialPortConf 1 }

ccsSerialInclude	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..40))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"File used in centralized management."
::= { ccsSerialGlobal 1 }

ccsSerialNFS		OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..50))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Remote Network File System where data buffering will be 
			 written instead of the default directory '/var/run/DB'."
::= { ccsSerialGlobal 2 }

ccsSerialLockDir		OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..50))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The lock directory for the CCS."
::= { ccsSerialGlobal 3 }

ccsSerialRlogin		OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..50))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Location of the rlogin binary that accepts the -i flag."
::= { ccsSerialGlobal 4 }

ccsSerialPppd	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..50))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Location of the pppd binary."
::= { ccsSerialGlobal 5 }

ccsSerialTelnet	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..50))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION "Location of the telnet application"
::= { ccsSerialGlobal 6 }

ccsSerialSsh		OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..50))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Location of the ssh application"
::= { ccsSerialGlobal 7 }

ccsSerialLocalLogins	OBJECT-TYPE
	SYNTAX		INTEGER {
				off(0),           
				on(1)   -- possible to login to the CCS directly by placing a !
			}
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION 	"This parameter is only necessary when authentication is 
			 being performed for a port.
			 This is useful if the Radius authentication server is down."
::= { ccsSerialGlobal 8 }

ccsSerialFacility	OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"This value (0-7) is the Local facility sent to the syslog daemon."
::= { ccsSerialGlobal 9 }

ccsSerialDBFacility	OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"This value (0-7) is the Local facility sent to the syslog 
			 daemon with the data when ."
::= { ccsSerialGlobal 10 }

ccsSerialGroupTable	OBJECT-TYPE
	SYNTAX		SEQUENCE OF CcsGroupEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"This associates group name and its users"
::= { ccsSerialGlobal 11 }

ccsgroupEntry	OBJECT-TYPE
	SYNTAX		CcsGroupEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"One particular association between group name and its users"
	INDEX		{ ccsgroupIndex }
::= { ccsSerialGroupTable 1 }

CcsGroupEntry ::= SEQUENCE  {
	ccsGroupIndex	InterfaceIndexOrZero,
	ccsGroupName	DisplayString,
	ccsGroupUsers	DisplayString
}

ccsGroupIndex	OBJECT-TYPE
	SYNTAX		InterfaceIndexOrZero	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"number to identifier the group"
::= { ccsgroupEntry  1 }                              

ccsGroupName	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..20))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The Group Name "
::= { ccsgroupEntry  2 }                              

ccsGroupUsers	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..80))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The users names "
::= { ccsgroupEntry  3 }                              

ccsSerialSpec	OBJECT-IDENTITY
	STATUS		current
	DESCRIPTION	"These parameters have the prefix all. or sxx. in the pslave.conf file"
::= { ccsSerialPortConf 2 }

ccsSerialPortTable	OBJECT-TYPE
	SYNTAX		SEQUENCE OF CcsSPortEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION 	"This is the specific configuration to serial port"
::= { ccsSerialSpec 1 }

ccssportEntry	OBJECT-TYPE
	SYNTAX		CcsSPortEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"One particular serial port configuration"
	INDEX		{ ccsSPortNumber }
::= { ccsSerialPortTable 1 }

CcsSPortEntry ::= SEQUENCE  {
	ccsSPortNumber		InterfaceIndexOrZero,	-- 0 == all.  X == ttyX sX.
	ccsSPortTty		DisplayString,		-- associate device
	ccsSPortName		DisplayString,		-- alias name
	ccsSPortSpeed		INTEGER,		-- physical port configuration
	ccsSPortDataSize		Integer32,
	ccsSPortStopBits		Integer32,
	ccsSPortParity		DisplayString,
	ccsSPortFlowCtrl		DisplayString,
	ccsSPortDTRdelay		Integer32,
	ccsSPortDCDCtrl		INTEGER,
	ccsSPortLogUtmp		INTEGER,		-- log into UTMP
	ccsSPortLogWtmp		INTEGER,		-- log into WTMP
	ccsSPortLogform		DisplayString,
	ccsSPortAuthtype		DisplayString,		-- authentication type
	ccsSPortAuthSrv1		IpAddress,	-- IP address of the primary authentication server
	ccsSPortAccSrv1		IpAddress,	-- IP address of the primarty accounting server
	ccsSPortAuthTmo		Integer32,	-- time out per authentication query
	ccsSPortAuthRetr		Integer32,	-- authentication number of retries
	ccsSPortAuthSrv2		IpAddress,	-- IP address of the secondary authentication server
	ccsSPortAccSrv2		IpAddress,	-- IP address of the secondary accounting server
	ccsSPortAuthSecret	DisplayString,	-- secret used in authentication
	ccsSPortAuthRadP		INTEGER,	-- accept RADIUS' user without password
	ccsSPortAuthAcc		DisplayString,	-- access restrition on Users
	ccsSPortProtocol		DisplayString,	-- Profile
	ccsSPortRemoteIP		DisplayString,	-- remote IP address
	ccsSPortSocketPort	DisplayString,	-- number of socket port
	ccsSPortRemHost		IpAddress,	-- IP address of the remote Host
	ccsSPortBanner		DisplayString,	-- Banner
	ccsSPortPrompt		DisplayString,	-- Login prompt
	ccsSPortTermType		DisplayString,	-- terminal type
	ccsSPortAutomUsr		DisplayString,	-- automatic user
	ccsSPortNetMask		IpAddress,	-- net mask
	ccsSPortPppMtu		Integer32,
	ccsSPortPppMru		Integer32,
	ccsSPortPppOptions	DisplayString,
	ccsSPortPppFoption	DisplayString,
	ccsSPortModemChat	DisplayString,	-- initchat send to modem
	ccsSPortSttyCmd		DisplayString,
	ccsSPortSockTx		Integer32,	-- socket transmission interval
	ccsSPortSockPoll		Integer32,	-- socket polling interval
	ccsSPortSockIdle		Integer32,	-- socket idle timeout
	ccsSPortDBsize		Integer32,	-- maximum size of the data buffering file
	ccsSPortDBtime		INTEGER,	-- data buffering with/without timestamp
	ccsSPortDBmode		DisplayString,	-- data bufferinf mode circ or line
	ccsSPortDBsyslog		Integer32,	-- size of the data send to syslog
	ccsSPortDBmenu		INTEGER,	-- menu of the data buffering
	ccsSPortDBalarm		INTEGER,	-- use alarm generating feature
	ccsSPortSSHbreak		DisplayString,	-- break sequence (SSH)
	ccsSPortSniffSess	DisplayString,	-- sniff session type
	ccsSPortSniffAdm		DisplayString,	-- admin users to sniff
	ccsSPortSniffEsc		DisplayString,	-- escape char to sniff session
	ccsSPortSniffMsess	DisplayString,	-- multiple session
	ccsSPortTelnetMode	INTEGER,	-- telnet client mode
	ccsSPortSysBufSess	INTEGER,	-- syslog buffering at all times
	ccsSPortLFSuppress	INTEGER,	-- LF suppression in socket_server session
	ccsSPortAutoInput	DisplayString,  -- Input string to auto answer 
	ccsSPortAutoOutput	DisplayString,  -- Output string to auto answer
	ccsSPortPmType 		DisplayString,  -- Power Management IPDU type
	ccsSPortPmUsers	 	DisplayString,  -- Power Management IPDU users
	ccsSPortPmOutlet 	DisplayString,  -- Power Management Outlets
	ccsSPortPmKey 		DisplayString,  -- Power Management Hotkey
	ccsSPortPmNOutlets 	Integer32, 	-- Power Management IPDU number of outlets 
	ccsSPortBreakInterval 	Integer32 	-- Break interval (in ms) 
}

ccsSPortNumber	OBJECT-TYPE
	SYNTAX		InterfaceIndexOrZero	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"number to identifier the serial port. Value 0 is ALL."
::= { ccssportEntry 1 }

ccsSPortTty		OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..25))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The device name for the serial port."
::= { ccssportEntry 2 }

ccsSPortName		OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..40))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Alias name given to the server connected to the serial port."
::= { ccssportEntry 3 }

ccsSPortSpeed	OBJECT-TYPE
	SYNTAX		INTEGER {
				s50bps(50), s75bps(75), s110bps(110), s134bps(134), 
				s150bps(150), s200bps(200), s300bps(300), s600bps(600), 
				s1200bps(1200), s1800bps(1800),
				s2400bps(2400), s4800bps(4800), 
				s9600bps(9600), s14400bps(14400), 
				s19200bps(19200), s28800bps(28800), 
				s38400bps(38400), s57600bps(57600), 
				s115200bps(115200), s230400bps(230400), 
				s460800bps(460800)
			}	
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The speed for serial port."
::= { ccssportEntry 4 }

ccsSPortDataSize	OBJECT-TYPE
	SYNTAX		Integer32 (4..8)
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The data size for serial port."
::= { ccssportEntry 5 }

ccsSPortStopBits	OBJECT-TYPE
	SYNTAX		Integer32 (1..2)
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The number of stop bits for serial port."
::= { ccssportEntry 6 }

ccsSPortParity	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..5))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The parity for serial port."
::= { ccssportEntry 7 }

ccsSPortFlowCtrl	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..5))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The flow control for serial port."
::= { ccssportEntry 8 }

ccsSPortDTRdelay	OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"This specifies how long (in miliseconds) a DTR signal
				 will be turned off before it is turned on again."
::= { ccssportEntry 9 }

ccsSPortDCDCtrl	OBJECT-TYPE
	SYNTAX		INTEGER {
				notctrl(0),  
				control(1)	   
			}
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"DCD signal controls the connection request." 
::= { ccssportEntry 10 }

ccsSPortLogUtmp	OBJECT-TYPE
	SYNTAX		INTEGER {
				inactive(0),  
				active(1)	   
			}
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"CCS update the login records in /var/run/utmp file." 
::= { ccssportEntry 11 }

ccsSPortLogWtmp	OBJECT-TYPE
	SYNTAX		INTEGER {
				inactive(0),  
				active(1)	   
			}
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"CCS update the login records in /var/run/wtmp file." 
::= { ccssportEntry 12 }

ccsSPortLogform	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..40))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"This is the format to write login record." 
::= { ccssportEntry 13 }

ccsSPortAuthtype		OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..25))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Authentication type : ." 
::= { ccssportEntry 14 }

ccsSPortAuthSrv1	OBJECT-TYPE
	SYNTAX		IpAddress
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"IP address of the primary authentication server." 
::= { ccssportEntry 15 }

ccsSPortAccSrv1	OBJECT-TYPE
	SYNTAX		IpAddress
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"IP address of the primary accounting server." 
::= { ccssportEntry 16 }

ccsSPortAuthTmo	OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"This is the timeout (in seconds) for authentication 
			query to be answered." 
::= { ccssportEntry 17 }

ccsSPortAuthRetr	OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"This defines the number of times each server is tried 
			before another is contacted." 
::= { ccssportEntry 18 }

ccsSPortAuthSrv2	OBJECT-TYPE
	SYNTAX		IpAddress
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"IP address of the secondary authentication server." 
::= { ccssportEntry 19 }

ccsSPortAccSrv2	OBJECT-TYPE
	SYNTAX		IpAddress
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"IP address of the secondary accounting server." 
::= { ccssportEntry 20 }

ccsSPortAuthSecret	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..40))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"This is the shared secret with authentciation servers." 
::= { ccssportEntry 21 }

ccsSPortAuthRadP	OBJECT-TYPE
	SYNTAX		INTEGER {
				inactive(0),  
				active(1)	   
			}
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"To accept Radius' user without password." 
::= { ccssportEntry 22 }

ccsSPortAuthAcc	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..40))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"access restrition on Users." 
::= { ccssportEntry 23 }

ccsSPortProtocol	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..40))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Defines the port serial's protocol." 
::= { ccssportEntry 24 }

ccsSPortRemoteIP	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..20))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"This is the default IP address of the serial port." 
::= { ccssportEntry 25 }

ccsSPortSocketPort	OBJECT-TYPE	
	SYNTAX		DisplayString (SIZE (0..10))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"This defines an alternative labeling system for the serial port." 
::= { ccssportEntry 26 }

ccsSPortRemHost	OBJECT-TYPE
	SYNTAX		IpAddress
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The IP address of the host to which the serial port will connect." 
::= { ccssportEntry 27 }

ccsSPortBanner	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..250))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"This defines the banner." 
::= { ccssportEntry 28 }

ccsSPortPrompt	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..250))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"This defines the login prompt to the serial port." 
::= { ccssportEntry 29 }

ccsSPortTermType	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..20))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"This defines the terminal type." 
::= { ccssportEntry 30 }

ccsSPortAutomUsr	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..40))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"This defines the automatic user." 
::= { ccssportEntry 31 }

ccsSPortNetMask	OBJECT-TYPE
	SYNTAX		IpAddress
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The network mask used in dial in connection." 
::= { ccssportEntry 32 }

ccsSPortPppMtu	OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The PPP MTU - dial in connection." 
::= { ccssportEntry 33 }

ccsSPortPppMru	OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The PPP MRU - dial in connection." 
::= { ccssportEntry 34 }

ccsSPortPppOptions	OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The PPP options when CCS autodetects the PPP session ." 
::= { ccssportEntry 35 }

ccsSPortPppFoption	OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The PPP forced options when the user has already been authenticated." 
::= { ccssportEntry 36 }

ccsSPortModemChat	OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The initchat send to modem connected." 
::= { ccssportEntry 37 }

ccsSPortSttyCmd	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..180))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"the tty settings after socket connection is established." 
::= { ccssportEntry 38 }

ccsSPortSockTx	OBJECT-TYPE	
	SYNTAX		Integer32
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Defines the delay (in miliseconds) before transmission to
			 the Ethernet of data received through a serial port ." 
::= { ccssportEntry 39 }

ccsSPortSockPoll	OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Keep-alive timer (miliseconds) to the TCP connection ." 
::= { ccssportEntry 40 }

ccsSPortSockIdle	OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The idle timeout in seconds ." 
::= { ccssportEntry 41 }

ccsSPortDBsize	OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Maximum size of the data buffering file." 
::= { ccssportEntry 42 }

ccsSPortDBtime	OBJECT-TYPE
	SYNTAX		INTEGER {
				inactive(0),
				active(1)
			}
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Timestamp in data buffering." 
::= { ccssportEntry 43 }

ccsSPortDBmode	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..5))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Data buffering mode : circ or line"
::= { ccssportEntry 44 }

ccsSPortDBsyslog	OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"size of the data buffering send to syslog." 
::= { ccssportEntry 45 }

ccsSPortDBmenu	OBJECT-TYPE
	SYNTAX		INTEGER {
				displayMenu(0),
				inactive(1),
				displayDB(2),
				displayParc(3)
			}
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Menu of the data buffering." 
::= { ccssportEntry 46 }

ccsSPortDBalarm	OBJECT-TYPE
	SYNTAX		INTEGER {
				inactive(0),
				active(1)
			}
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Generating Alarms." 
::= { ccssportEntry 47 }

ccsSPortSSHbreak	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..16))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Break sequence - ssh session"
::= { ccssportEntry 48 }

ccsSPortSniffSess	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..5))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Sniff session type"
::= { ccssportEntry 49 }

ccsSPortSniffAdm	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..40))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"List of admin users to sniff session"
::= { ccssportEntry 50 }

ccsSPortSniffEsc	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..6))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Escape sequence used in sniff session"
::= { ccssportEntry 51 }

ccsSPortSniffMsess	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..20))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Multiple sniff sessions"
::= { ccssportEntry 52 }

ccsSPortTelnetMode	OBJECT-TYPE
	SYNTAX		INTEGER {
				text(0),
				binary(1)
			}
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Mode negotiated by client telnet with the server"
::= { ccssportEntry 53 }

ccsSPortSysBufSess	OBJECT-TYPE
	SYNTAX		INTEGER {
				yes(0),
				no(1)
			}
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Syslog Buffering at all times"
::= { ccssportEntry 54 }

ccsSPortLFSuppress	OBJECT-TYPE
	SYNTAX		INTEGER {
				inactive(0),
				active(1)
			}
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"LF suppression in socket_server session"
::= { ccssportEntry 55 }

ccsSPortAutoInput	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..40))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"This string is used to auto answer. It's the input string"
::= { ccssportEntry 56 }

ccsSPortAutoOutput	OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..40))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"This string is used to auto answer. It's the output string"
::= { ccssportEntry 57 }

ccsSPortPmType		OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..20))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"IPDU type, when the port protocol is configured as IPDU"
::= { ccssportEntry 58 }

ccsSPortPmUsers		OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..40))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"List of users which can access the IPDU and their respective outlets"
::= { ccssportEntry 59 }

ccsSPortPmOutlet		OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..40))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"List of <IPDU port>.<outlet> pairs, where the server is connected"
::= { ccssportEntry 60 }

ccsSPortPmKey		OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (0..8))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Hotkey to grant access to the Power Management from a Telnet/SSH session"
::= { ccssportEntry 61 }

ccsSPortPmNOutlets	OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Number of outlets of the IPDU"
::= { ccssportEntry 62 }

ccsSPortBreakInterval	OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The break interval in miliseconds." 
::= { ccssportEntry 63 }

END

AVOCENT-CYCLADES-CS-INFO-MIB DEFINITIONS ::= BEGIN

IMPORTS
	ccsManagement
		FROM AVOCENT-CYCLADES-CS-MIB
	InterfaceIndex
		FROM IF-MIB
	MODULE-IDENTITY, OBJECT-TYPE, 
	Counter32, Integer32
			FROM SNMPv2-SMI
	DisplayString
		FROM SNMPv2-TC;

ccsInformation	MODULE-IDENTITY
	LAST-UPDATED	"200704260000Z"
	ORGANIZATION	"Avocent Corporation"
	CONTACT-INFO	"postal: Avocent Corporation
			3541 Gateway Boulevard
			Fremont, CA 94538, USA
			e-mail: Technical Support
			techsupport@avocent.com"
	DESCRIPTION	"This module defines Cyclades CS Family Information objects"
	REVISION	"200704260000Z"
	DESCRIPTION	"First Draft"
::= { ccsManagement 3 }

ccsInfoSerialTable	OBJECT-TYPE
	SYNTAX		SEQUENCE OF CcsISPortEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"This is the information of the specific serial port"
::= { ccsInformation 1 }

ccsisPortEntry	OBJECT-TYPE
	SYNTAX		CcsISPortEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"One particular serial port "
	INDEX		{ ccsISPortNumber }
::= { ccsInfoSerialTable 1 }

CcsISPortEntry ::= SEQUENCE  {
	ccsISPortNumber	InterfaceIndex,      --  X == ttyX sX.
	ccsISPortTty	DisplayString,         -- associate device
	ccsISPortName	DisplayString,          -- alias name
	ccsISPortSpeed	Integer32,
	ccsISPortTxBytes	Counter32,          
	ccsISPortRXBytes	Counter32,
	ccsISPortErrFrame	Counter32,
	ccsISPortErrParity	Counter32,
	ccsISPortErrBreaks	Counter32,
	ccsISPortErrOverrun	Counter32,
	ccsISPortSigDTR		INTEGER,
	ccsISPortSigCD		INTEGER,
	ccsISPortSigDSR		INTEGER,
	ccsISPortSigRTS		INTEGER,
	ccsISPortSigCTS		INTEGER,
	ccsISPortSigRI		INTEGER
 }

ccsISPortNumber	OBJECT-TYPE
	SYNTAX		InterfaceIndex	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"number to identifier the serial port."
::= { ccsisPortEntry 1 }

ccsISPortTty		OBJECT-TYPE
	SYNTAX		DisplayString	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The device name for the serial port."
::= { ccsisPortEntry 2 }

ccsISPortName		OBJECT-TYPE
	SYNTAX		DisplayString	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Alias name given to the server connected to the serial port."
::= { ccsisPortEntry 3 }

ccsISPortSpeed	OBJECT-TYPE
	SYNTAX		Integer32 
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The speed for serial port."
::= { ccsisPortEntry 4 }

ccsISPortTxBytes	OBJECT-TYPE        
	SYNTAX		Counter32 
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The number of transmited bytes by the serial port."
::= { ccsisPortEntry 5 }

ccsISPortRXBytes	OBJECT-TYPE
	SYNTAX		Counter32 
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The number of received bytes by the serial port."
::= { ccsisPortEntry 6 }

ccsISPortErrFrame	OBJECT-TYPE
	SYNTAX		Counter32 
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The number of frame error."
::= { ccsisPortEntry 7 }

ccsISPortErrParity	OBJECT-TYPE
	SYNTAX		Counter32 
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The number of parity error."
::= { ccsisPortEntry 8 }

ccsISPortErrBreaks	OBJECT-TYPE	
	SYNTAX		Counter32 
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The number of breaks error."
::= { ccsisPortEntry 9 }

ccsISPortErrOverrun	OBJECT-TYPE
	SYNTAX		Counter32 
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The number of overrun error."
::= { ccsisPortEntry 10 }

ccsISPortSigDTR	OBJECT-TYPE
	SYNTAX		INTEGER {
				down(0),
				up(1)
			}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The state of DTR signal."
::= { ccsisPortEntry 11 }

ccsISPortSigCD	OBJECT-TYPE
	SYNTAX		INTEGER {
				down(0),
				up(1)
			}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The state of DCD signal."
::= { ccsisPortEntry 12 }

ccsISPortSigDSR	OBJECT-TYPE
	SYNTAX		INTEGER {
				down(0),
				up(1)
			}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The state of DSR signal."
::= { ccsisPortEntry 13 }

ccsISPortSigRTS	OBJECT-TYPE
	SYNTAX		INTEGER {
				down(0),
				up(1)
			}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The state of RTS signal."
::= { ccsisPortEntry 14 }

ccsISPortSigCTS	OBJECT-TYPE
	SYNTAX		INTEGER {
				down(0),
				up(1)
			}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The state of CTS signal."
::= { ccsisPortEntry 15 }

ccsISPortSigRI	OBJECT-TYPE
	SYNTAX		INTEGER {
				down(0),
				up(1)
			}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The state of RI signal."
::= { ccsisPortEntry 16 }

END

AVOCENT-CYCLADES-CS-ADM-MIB DEFINITIONS ::= BEGIN

IMPORTS
	ccsManagement
		FROM AVOCENT-CYCLADES-CS-MIB
	OBJECT-TYPE, MODULE-IDENTITY
		FROM SNMPv2-SMI;

ccsAdministration	MODULE-IDENTITY
	LAST-UPDATED	"200704260000Z"
	ORGANIZATION	"Avocent Corporation"
	CONTACT-INFO	"postal: Avocent Corporation
			3541 Gateway Boulevard
			Fremont, CA 94538, USA
			e-mail: Technical Support
			techsupport@avocent.com"
	DESCRIPTION	"This module defines Cyclades CS Family Administration objects"
	REVISION	"200704260000Z"
	DESCRIPTION	"First Draft"
::= { ccsManagement 4 }

ccsSave	OBJECT-TYPE
	SYNTAX		INTEGER {
				nosave(0),
				save(1)
			}
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Exec saveconf command"
::= { ccsAdministration 1 }
                               
ccsSerialHUP	OBJECT-TYPE
	SYNTAX		INTEGER {
				norestartportslave(0),
				restartportslave(1)
			}
	MAX-ACCESS    read-write
	STATUS          current
	DESCRIPTION     "Exec signal_ras hup command"
::= { ccsAdministration 2 }

END

AVOCENT-CYCLADES-CS-PM-MIB DEFINITIONS ::= BEGIN

IMPORTS
	ccsManagement
		FROM AVOCENT-CYCLADES-CS-MIB
	OBJECT-TYPE, MODULE-IDENTITY, Integer32
		FROM SNMPv2-SMI
	InterfaceIndex, InterfaceIndexOrZero
		FROM IF-MIB
	DisplayString
		FROM SNMPv2-TC;

ccsPowerManagement   MODULE-IDENTITY
	LAST-UPDATED	"200704260000Z"
	ORGANIZATION	"Avocent Corporation"
	CONTACT-INFO	"postal: Avocent Corporation
			3541 Gateway Boulevard
			Fremont, CA 94538, USA
			e-mail: Technical Support
			techsupport@avocent.com"
	DESCRIPTION	"This module defines Cyclades CS Family PM Proxy objects"
	REVISION	"200704260000Z"
	DESCRIPTION	"First Draft"
::= { ccsManagement 5 }

ccsNumberOfPM		OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The total number of PM's connected on the unit"
::= { ccsPowerManagement 1 }
 
ccsPMTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF CcsPMEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Allows to read information about each connected PM"
::= { ccsPowerManagement 2 }

ccsPMEntry	OBJECT-TYPE
	SYNTAX		CcsPMEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Information about the connected PM"
	INDEX		{ ccsPMSerialPortNumber }
::= { ccsPMTable 1 }

CcsPMEntry ::= SEQUENCE  {
	ccsPMSerialPortNumber	InterfaceIndex,     
	ccsPMNumberOutlets Integer32,
	ccsPMNumberUnits	Integer32,
	ccsPMCurrent	DisplayString,
	ccsPMVersion	DisplayString,
	ccsPMTemperature	DisplayString,
	ccsPMCommand	DisplayString
}

ccsPMSerialPortNumber	OBJECT-TYPE
	SYNTAX		InterfaceIndex	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The number of the serial port when the PM is connected."
::= { ccsPMEntry 1 }

ccsPMNumberOutlets	OBJECT-TYPE
	SYNTAX		Integer32	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Number of outlets."
::= { ccsPMEntry 2 }

ccsPMNumberUnits		OBJECT-TYPE
	SYNTAX		Integer32	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Total number of PM unists that are accessed by this 
			serial port."
::= { ccsPMEntry 3 }

ccsPMCurrent	OBJECT-TYPE
	SYNTAX		DisplayString	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Current reading for the PM."
::= { ccsPMEntry 4 }

ccsPMVersion	OBJECT-TYPE
	SYNTAX		DisplayString	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The software version of the PM."
::= { ccsPMEntry 5 }

ccsPMTemperature	OBJECT-TYPE
	SYNTAX		DisplayString	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The PM temperature."
::= { ccsPMEntry 6 }

ccsPMCommand		OBJECT-TYPE
	SYNTAX		DisplayString (SIZE (1..100))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"A character string for the user to send commands to
			PM. He can use it to does the save command.
			Or to list the outlets that need to be turned off, 
			or turned on , or cycled or locked or unlocked as a 
			group. The command is the first word and is followed 
			by a space and the outlet list (otulets commands). 
			Valid commands are 'on', 'off', 'cycle', 'lock',
			'unlock', 'save'."
::= { ccsPMEntry 7 }

ccsPMUnitTable	OBJECT-TYPE
	SYNTAX		SEQUENCE OF CcsPMUnitEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Allow operations on specific PM unit connected"
::= { ccsPowerManagement 3 }

ccsPMUnitEntry	OBJECT-TYPE
	SYNTAX		CcsPMUnitEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Allow operations on outlet"
	INDEX		{ ccsPMSerialPortNumber, ccsPMUnitNumber }
::= { ccsPMUnitTable 1 }

CcsPMUnitEntry ::= SEQUENCE  {
	ccsPMUnitNumber		InterfaceIndex,     
	ccsPMUnitVersion		DisplayString,
	ccsPMUnitOutlets		Integer32,
	ccsPMUnitFirstOutlet 	Integer32,
	ccsPMUnitCurrent		Integer32,
	ccsPMUnitMaxCurrent 	Integer32,
	ccsPMUnitTemperature 	Integer32,
	ccsPMUnitMaxTemperature 	Integer32
}

ccsPMUnitNumber	OBJECT-TYPE
	SYNTAX		InterfaceIndex	
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"The number of the PM unit in the daisy-chained mode."
::= { ccsPMUnitEntry 1 }

ccsPMUnitVersion	OBJECT-TYPE
	SYNTAX		DisplayString	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The software version of this PM unit."
::= { ccsPMUnitEntry 2 }

ccsPMUnitOutlets	OBJECT-TYPE
	SYNTAX		Integer32	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Number of outlets of this PM unit."
::= { ccsPMUnitEntry 3 }

ccsPMUnitFirstOutlet	OBJECT-TYPE
	SYNTAX		Integer32	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Number of the first outlet of this PM unit."
::= { ccsPMUnitEntry 4 }

ccsPMUnitCurrent	OBJECT-TYPE
	SYNTAX		Integer32	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Current of this PM unit in AMP.
			The value of this object is the actual current in 
                        AMP * 10. You need to translate the readed value
                        (Ex. : value is 5, the current is 0.5 AMP.)" 
::= { ccsPMUnitEntry 5 }

ccsPMUnitMaxCurrent	OBJECT-TYPE
	SYNTAX		Integer32	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Maximum current of this PM unit in AMP.
			The value of this object is the maximum current in 
                        AMP * 10. You need to translate the readed value
                        (Ex. : value is 5, the maximum current is 0.5 AMP.)" 
::= { ccsPMUnitEntry 6 }

ccsPMUnitTemperature	OBJECT-TYPE
	SYNTAX		Integer32	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Temperature of this PM unit in Celsius degrees.
			The value of this object is the actual temperature in 
                        degrees C * 10. You need to translate the readed value
                        (Ex. : value is 240, the temperature is 24 Celsius.) 
			If the temperature measurement is not installed this 
			value will be 0.
                        Valid values are 5 to 999 ( 0.5 to 99.9 Celsius)."
::= { ccsPMUnitEntry 7 }

ccsPMUnitMaxTemperature	OBJECT-TYPE
	SYNTAX		Integer32	
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Maximum temperature value of this PM unit in Celsius 
			degrees. The value of this object is the maximum 
			temperature in degrees C * 10. You need to translate 
			the readed value(Ex. : value is 240, the maximum
			temperature is 24 Celsius). 
			If the temperature measurement is not installed this 
			value will be 0.
                        Valid values are 5 to 999 ( 0.5 to 99.9 Celsius)."
::= { ccsPMUnitEntry 8 }

ccsOutletTable	OBJECT-TYPE
	SYNTAX		SEQUENCE OF CcsOutletEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Allow operations on outlet"
::= { ccsPowerManagement 4 }

ccsOutletEntry	OBJECT-TYPE
	SYNTAX		CcsOutletEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Allow operations on outlet"
	INDEX		{ ccsPMSerialPortNumber, ccsOutletNumber }
::= { ccsOutletTable 1 }

CcsOutletEntry ::= SEQUENCE  {
	ccsOutletNumber	InterfaceIndexOrZero,     
	ccsOutletName	DisplayString,
	ccsOutletServer	DisplayString,
	ccsOutletPower	INTEGER,
	ccsOutletLock	INTEGER,
	ccsOutletPUInterval Integer32
}

ccsOutletNumber	OBJECT-TYPE
	SYNTAX		InterfaceIndexOrZero	
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"The outlet number on the PM. Zero is ALL outlets."
::= { ccsOutletEntry 1 }

ccsOutletName OBJECT-TYPE
	SYNTAX		DisplayString (SIZE(1 .. 8))	
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The name given to a particular outlet Maximum size is 8 characters."
::= { ccsOutletEntry 2 }

ccsOutletServer OBJECT-TYPE
	SYNTAX		DisplayString 	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Alias of the Server connected to this outlet ."
::= { ccsOutletEntry 3 }

ccsOutletPower	OBJECT-TYPE
	SYNTAX	INTEGER {
			off	(0),
			on	(1),
			cycle	(2),
			unknow  (3)
		}
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Getting this object will return the power state of
			the outlet. Valid return states are UNKNOW, OFF and
			ON. Setting this object will change the power state 
			of the outlet."
::= { ccsOutletEntry 4 }

ccsOutletLock	OBJECT-TYPE
	SYNTAX	INTEGER {
			unlock	(0),
			lock	(1),
			unknow 	(2)
		}
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Getting this object will return the lock state of
			the outlet. Setting this object will change the 
			lock state of the outlet."
::= { ccsOutletEntry 5 }

ccsOutletPUInterval	OBJECT-TYPE
	SYNTAX		Integer32	
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"The power unit interval of this outlet in seconds.
			The value of this object is the actual interval in 
                        seconds * 10. You need to translate the readed value
                        (Ex. : value is 5, the interval is 0.5 seconds.)" 
::= { ccsOutletEntry 6 }

END